Acrylic Film - ProLINK Clear, acrylic bonding films - 1000R

ProLink bonding films - 1000R

Available in thickness’ 50 to 3000 microns. Prolinks are specifically designed to provide very high performance bonding, fixing and mounting of assembly parts, where historically wet glues, screws and other mechanical fixings may have been required. Used very widely in the glass, glazing, transport and signage industries. Applications include liquid resin laminating systems, post and panel signs, truck and bus assembly, light boxes, white goods
construction.

Highly elastomeric, for vibration and frequency absorption.
Designed for both metals and plastics.
Products have good tack for assembly purposes, helping to reduce dwell times.
Good clarity.
Very high temperature, UV, aging and environmental resistance, ideal for exterior use.
Special products for low energy surfaces.
Activator system (prelink rs), to further improve performance.

ProLINK 1000R is the ultimate bonding film.

The thickness of the adhesive film, gives excellent conformability to structured and uneven surfaces, whilst also acting as a ‚gap' filling medium. The high viscoelastic nature of the product, significantly reduces stress along the bond line (when compared with mechanical fixing methods) and has the ability to absorb shock, vibration,noise (frequency) and diferential expansion co-efficients. The pure acrylic adhesive has a good level of initial tack for assembly purposes, with a bond strength that increases significantly over time.
ProLINK 1000R is designed for permanent bonding of metals, glass and most plastics, where an ‚invisible' bond line and permanent fixing and mounting is required for critical and exacting applications.

Liner
Silicon coated HDPE film, 130micron.
Colour: Blue

Adhesive
Polyacrylat
Coat weight: 1000 g/m2
Highly cross linked, pure acrylat, permanent bonding adhesive.

Adhesion
According to AFERA 4001
Glass 40N/25mm
Steel 43N/25mm
PVC 28N/25mm
Alu 34N/25mm
PMMA 30N/25mm

Temperature Resistance: from - 40°C to + 150°C (long term) 260°C+ (short term).
According to ISTM D3654.
Method: area of 6.25cm2 with 1.0kg load @1500c for 10 000 minutes.
Result: No change.

ProLink bonding films - 1000R Key Characteristics:

process directory.com Redstone Media, Tedco Business Works, Henry Robson Way, South Shields, NE33 1RF. UK
Tel: +44 (0) 191 427 0255	Fax: +44 (0) 191 427 4648
email:
© copyright 2005 - 2006 redstonemedia.com

a redstone media directory for the process industry